IPortable Snow OSx86 10 6 2 Boot
IPortable Snow OSx86 10 6 2 Boot > https://urlca.com/2tvGT7
How to Install iPortable Snow OSx86 10.6.2 on a USB Drive
If you want to run Mac OS X Snow Leopard on your PC, but you don't have a DVD drive or a compatible hardware, you can use iPortable Snow OSx86 10.6.2 Bootable USB image. This is a modified version of Mac OS X that can boot from a USB drive and run on most Intel and AMD processors with SSE2 and SSE3 support.
In this article, we will show you how to download, prepare and install iPortable Snow OSx86 10.6.2 on a USB drive and boot your PC with it.
What You Need
A PC with an Intel or AMD processor that supports SSE2 and SSE3 instructions.
A USB drive with at least 8 GB of free space.
A Windows PC or a Mac to create the bootable USB drive.
The iPortable Snow OSx86 10.6.2 Bootable USB image file. You can download it from here.
How to Create the Bootable USB Drive
If you have a Windows PC, you can use a tool called TransMac to write the iPortable Snow OSx86 10.6.2 image file to your USB drive. You can download TransMac from here.
If you have a Mac, you can use Disk Utility to restore the iPortable Snow OSx86 10.6.2 image file to your USB drive.
Follow these steps to create the bootable USB drive:
Insert your USB drive into your Windows PC or Mac.
Open TransMac or Disk Utility and locate your USB drive.
Right-click on your USB drive and select Format Disk for Mac (TransMac) or Erase (Disk Utility).
Select Mac OS Extended (Journaled) as the format type and name your USB drive as iPortable Snow.
Right-click on your USB drive again and select Restore with Disk Image (TransMac) or Restore (Disk Utility).
Browse to the location where you saved the iPortable Snow OSx86 10.6.2 image file and select it.
Click OK (TransMac) or Restore (Disk Utility) and wait for the process to complete.
Eject your USB drive when done.
How to Boot Your PC with iPortable Snow OSx86 10.6.2
Now that you have created the bootable USB drive, you can use it to boot your PC with iPortable Snow OSx86 10.6.2.
Follow these steps to boot your PC with iPortable Snow OSx86 10.6.2:
Insert your USB drive into your PC.
Restart your PC and enter the BIOS setup menu by pressing the appropriate key (usually F2, F10, F12 or Del).
Change the boot order to make your USB drive the first boot device.
Save and exit the BIOS setup menu.
Your PC will reboot and load the iPortable Snow OSx86 10.6.2 bootloader.
Select iPortable Snow from the list of options and press Enter.
The default boot mode of iPortable Snow is 32-bit. If you want to boot in 64-bit mode, type arch=x86_64 at the prompt and press Enter.
iPortable Snow will start loading Mac OS X Snow Leopard on your PC.
Follow the on-screen instructions to complete the installation and setup of Mac OS X Snow Leopard on your PC. aa16f39245